Overview of OEM Customized Refractory Sintered Silicon Carbide Ceramic Plate

Silicon Carbide (SiC) ceramic is an advanced engineering material synthesized through the high-temperature reaction of silica sand and carbon. Known for its exceptional hardness and stability, this technical ceramic combines the lightweight properties of ceramics with the thermal performance of metals. Silicon Carbide ceramics exist in various forms, including sintered SiC, reaction-bonded SiC (RBSC), and recrystallized SiC, each offering unique microstructures that deliver outstanding performance in the most demanding industrial environments. With its covalent bond structure, SiC provides remarkable durability that surpasses conventional ceramics and metals in extreme conditions.

Features of OEM Customized Refractory Sintered Silicon Carbide Ceramic Plate

Exceptional Hardness: Ranks 9.5 on the Mohs scale, second only to diamond, providing superior wear and abrasion resistance

High-Temperature Stability: Maintains mechanical strength up to 1400°C (2550°F) in inert atmospheres and 1600°C in oxidizing environments

Thermal Shock Resistance: Excellent thermal conductivity (120-170 W/m·K) combined with low thermal expansion ensures resistance to rapid temperature changes

Chemical Inertness: Unaffected by most acids, alkalis, and corrosive substances; only attacked by strong oxidizing agents at high temperatures

Outstanding Thermal Conductivity: Four times higher than stainless steel, enabling efficient heat transfer applications

Lightweight Structure: Approximately one-third the density of steel while maintaining superior strength-to-weight ratio

Specification of OEM Customized Refractory Sintered Silicon Carbide Ceramic Plate

Requirements of OEM Customized Refractory Sintered Silicon Carbide Porcelain Plate

Product and Composition

Refractory sintered silicon carbide (SSiC) forms the base of this ceramic plate. It contains over 98% pure SiC. No binders or ingredients weaken its structure. This makes certain high thermal stability and mechanical toughness also under extreme conditions.

Physical Features

Home plate reveals superb firmness, rating around 2800– 3000 HV on the Vickers scale. Its thickness drops in between 3.10 and 3.15 g/cm TWO. Reduced porosity– usually under 2%– makes it extremely immune to chemical strike and thermal shock. The flexural toughness reaches 350– 450 MPa, while compressive strength surpasses 2000 MPa.

Thermal Performance

This ceramic plate manages temperature levels up to 1600 ° C in oxidizing environments and also greater in inert atmospheres. Its thermal conductivity arrays from 80 to 120 W/m · K, enabling effective warm dissipation. The coefficient of thermal expansion remains low at about 4.5 × 10 ⁻⁶/ ° C (from 20 ° C to 1000 ° C), which decreases fracturing risk during quick heating or cooling cycles.

Modification Options

We offer complete OEM modification. You can specify dimensions, thickness, surface finish, and tolerance degrees. Criterion density starts at 1 mm and goes up to 50 mm. Shapes include rectangles, circles, rings, or complex geometries based upon your drawings. Surface roughness can be tailored from Ra 0.1 µm (mirror gloss) to Ra 3.2 µm (as-sintered).

Applications

These plates work well in extreme commercial settings. Typical uses include heater parts, wear-resistant linings, semiconductor processing parts, and high-temperature components. Their corrosion resistance makes them ideal for chemical handling tools as well.

Quality control

Every set goes through strict assessment. We test for dimensional accuracy, density, toughness, and pureness. Certifications of conformance are given with each order. All items fulfill ISO 9001 requirements.

Applications of OEM Customized Refractory Sintered Silicon Carbide Ceramic Plate

Applications of OEM Custom-made Refractory Sintered Silicon Carbide Ceramic Plate

High-Temperature Industrial Environments

Refractory sintered silicon carbide ceramic plates are built to take care of severe warm. They maintain their toughness and shape even when temperature levels exceed 1,400 ° C. This makes them suitable for use in heating systems, kilns, and other high-heat commercial devices. Factories depend on these plates due to the fact that they last much longer than steel or common ceramics under intense thermal anxiety.

Wear-Resistant Elements

These ceramic plates stand up to wear far better than most products. They withstand consistent friction, abrasion, and fragment influence. Industries like mining, cement production, and power generation use them in chutes, liners, and nozzles. Their solidity lowers maintenance requirements and keeps procedures running efficiently.

Rust Defense

Silicon carbide does not react quickly with acids, alkalis, or rough chemicals. That’s why chemical processing plants pick these plates for linings, seals, and support frameworks. They safeguard tools from deterioration without including extra weight or mass.

OEM Modification for Precise Fit

Every equipment has one-of-a-kind requirements. With OEM personalization, producers shape each plate to match exact measurements, openings, contours, or mounting points. This ensures a best fit the very first time– no modifications required on-site. Personalized designs also aid boost system effectiveness and lower downtime during installment or replacement.

Tidy and Stable Performance

In semiconductor and solar battery manufacturing, even little fragments can mess up a product. These ceramic plates stay tidy, do not lose dust, and hold limited tolerances gradually. Their security supports accuracy procedures where consistency matters most.

Company Introduction

Welcome to Eduloc, a leading global supplier of high-quality ceramic grinding balls. Our product range includes,Mullite Ceramic, Quartz Ceramic, Aluminum Nitride Ceramic, Silicon Nitride Ceramic, Silicon Carbide Ceramic designed for industries such as mining, chemicals, coatings, electronics, and pharmaceuticals. We are committed to providing durable and efficient grinding solutions tailored to our customers’ diverse needs. With advanced manufacturing technology and stringent quality control, our ceramic grinding balls excel in wear resistance, corrosion resistance, and thermal stability. Partner with us for reliable products and exceptional service that enhance your production efficiency and reliability.

If you have any questions, please feel free to contact us.

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of OEM Customized Refractory Sintered Silicon Carbide Ceramic Plate

Frequently Asked Questions: OEM Customized Refractory Sintered Silicon Carbide Ceramic Plate

What is a sintered silicon carbide ceramic plate?

This plate is made from pure silicon carbide powder. It is formed under high pressure and then fired at very high temperatures. The result is a dense, strong ceramic part that can handle extreme heat and wear.

Why choose sintered silicon carbide over other ceramics?

Sintered silicon carbide has excellent thermal conductivity. It also resists corrosion, oxidation, and mechanical wear better than most other ceramics. These properties make it ideal for harsh industrial environments.

Can you customize the size and shape?

Yes. We offer full OEM customization. You can specify exact dimensions, tolerances, and shapes. Our team works with your design to produce parts that fit your equipment perfectly.

What industries use these plates?

These plates are common in metallurgy, chemical processing, semiconductor manufacturing, and power generation. Any application needing high-temperature stability and long service life benefits from this material.

How long does production take?

Lead time depends on order size and complexity. Standard custom orders usually take 4 to 6 weeks. We confirm timelines after reviewing your specifications and quantity needs.