Cool 3D printing takes you through different technologies

SLS Nylon Powder PrintingNylon sintering (selective laser sintering) is a project that uses spread powder sticks to tile a thick layer of powder materials, such as 3D printed metal powders, on parts. It is heated below the powder melting temperature instead of a set temperature.
Material: nylons, fibers and nylons


SLM Metal 3D Printing
Metal sintering can be described as a selective laser sintering. It is the process of using a powder stick to spread a layer on molded surfaces, then heating to a temperature well below that of the metal sintering temperature.
Materials: aluminum alloy, stainless steel die steel, titanium alloy, etc


SLA laser photocuring flow
Under the control of the computer, scan along the liquid surface according to the requirements of the section contour. Under the control of a computer, focus the laser on the liquid surface and scan it according to the section profile. The resin will be cured in the scanned areas. The newly-cured layer is then adhered to the previous one and so forth until the whole product is formed.
( Tech Co., Ltd. ) is an experienced 3D metal powders producer with more than 12 years in the chemical products research, development and manufacturing industry. Contact us to send an inquiry if you are interested in high-quality 3D printed metal powders.


Inquiry us

Our Latest Products

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal…

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Tungsten alloy heavy plate has low thermal expansion. It is also known for its high density, high radiation resistance, and high thermal conductivity. It is used widely in the aerospace and medical industries. About Metal Alloy 18.5g/cm3 Polished T…

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

W-Ni - Cu alloy is used in the production of Tungsten alloy balls. It is widely utilized in the fields of aviation, oil drilling, and aerospace. High Density Tungsten Alloy Metal Ball, 18g/cm3: Diameter: 1.0mm-150.0mm Surface: sintered or fo…